healeys
[Top] [All Lists]

[Healeys] Fw: BJ8 clutch upgrade

To: "I Erbs" <eyera3@gmail.com>, "Healey List" <healeys@autox.team.net>
Subject: [Healeys] Fw: BJ8 clutch upgrade
From: "Earl Kagna" <kags@shaw.ca>
Date: Tue, 7 Apr 2009 19:55:13 -0700
Ira:

For your information - this clutch topic went around this list about three 
weeks or so ago - just before you re-subscribed.  Below is a post that I 
made at that time.  The information is pertinent to you.

Michael Salter's idea is intriguing - I had a buddy that adapted a vaccuum 
pump (GM diesel power brake belt driven pump from an Olds or something) to 
an E-type clutch a few years ago to solve a similar bad left leg problem - 
it worked well.

If you don't already know it, Bill Bolton is very close to you - just 
south - in Oregon.

Earl Kagna
Victoria, B.C.
BT7 tri-carb
BJ8

----- Original Message ----- 
From: "Earl Kagna" <kags@shaw.ca>
To: "m.fawcett" <m.fawcett@verizon.net>; "Healey List" 
<healeys@autox.team.net>
Sent: Monday, March 16, 2009 7:41 PM
Subject: Re: [Healeys] BJ8 clutch upgrade


Mark:

It's a worthwhile upgrade (IMHO) - the BJ8's diaghprgam clutch is superior.

The differences between the earlier flywheel and the BJ8 - there are 3 dowel
holes rather than 2, and they are in a different cicle.  Also, the 6 clutch
cover mount holes are in a different cicle, and are a different bolt size.
Understandably, it would be easier to use a BJ8 flywheel, but if one is not
available, the earlier one can be modified to take the later clutch by a
competent machine shop.  Either way, this conversion can be done with either
the original gearbox / overdrive, or the Toyota 5 speed conversion.

Bill Bolton may well be able to help you - he may have lightened BJ8
flywheels available.  If you need his contact info, let me know.

Try it, you'll like it!

Earl Kagna
Victoria, B.C.
BT7 tri-carb (Bolton Lightened BJ8 flywheel, BJ8 clutch)
BJ8 (Bolton Lightened flywheel, Toyota 5-speed [Smitty] - if I ever get it
back on the road!)

----- Original Message ----- 
From: "m.fawcett" <m.fawcett@verizon.net>
To: "Healey List" <healeys@autox.team.net>
Sent: Monday, March 16, 2009 5:44 PM
Subject: [Healeys] BJ8 clutch upgrade


Hi All,

I am going to be replacing my clutch soon and I was wondering if the BJ8
clutch fits the earlier 3000 flywheels?  I think I've heard that this is a
good upgrade. I'm also changing to a lightened flywheel.

Thanks,

Mark Fawcett
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>
  • [Healeys] Fw: BJ8 clutch upgrade, Earl Kagna <=