Alan
People seem to be having problems with the size of these, but assuming they
are the right bolts it should be easy to just squeeze them in using a vice and
a suitable sized socket on the other side, the bolt head then squeezes against
the socket on the other side of the hub, just make sure the bolt can pass thru
the inside of the socket:
http://www.austin-healey3000.com/apps/photos/photo?photoid=5132641
It just takes a steady pressure, but souldnt be that hard.
cheers Andy
_________________________________________________________________
Share your photos with Windows Live Photos Free.
http://clk.atdmt.com/UKM/go/134665338/direct/01/
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|