healeys
[Top] [All Lists]

[Healeys] Charging system

To: healey list <healeys@autox.team.net>
Subject: [Healeys] Charging system
From: Charlie Baldwin <mgcharlie@comcast.net>
Date: Sun, 19 Apr 2009 13:59:45 -0400
Yesterday I got my BT7 tricarb running again after a several year 
cosmetic restoration.  I had done the engine some years previously.  
This latest work also included a new wiring harness and a Smitty 5 speed 
conversion.
Before starting the car I verified that all of the electrical systems 
worked, but after starting saw that the charging light was on.  Before 
the project everything had worked.  I checked the generator in-situ as 
outlined in the factory manual and it showed to be putting out fine.  I 
also checked all of the connections at the regulator for the correct 
location and tightness, including the ground.and where it attaches to 
the body.
All seems fine, so before I blame the voltage regulator ( that worked 
fine previously), is there anywhere else that I should be looking?  
Perhaps taking the overdrive circuit out of the mix?
Any suggestions are welcome.
BTW, does anyone actually change the settings on the regulator?  It 
worked before, why would it not now?  It seems akin to the instructions 
in the manual for taking apart the clutch cover.
Thanks.
Charlie Baldwin

[demime 1.01d removed an attachment of type text/x-vcard which had a name of 
mgcharlie.vcf]
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>