healeys
[Top] [All Lists]

[Healeys] re. Heat Barrier Cloth vs Dynamat

To: healey list <healeys@autox.team.net>
Subject: [Healeys] re. Heat Barrier Cloth vs Dynamat
From: joe mulqueen <joemulqueen@yahoo.com>
Date: Sun, 28 Jun 2009 13:04:11 -0700 (PDT)
IMHO, the primary benefit of asphalt type insulation (Dynamat, Brownbread,
etc) is to reduce sound and applying it directly to the sheet metal is where
you want it.  This is exactly what many cars come with from the factory.  That
said, "entry" level cars don't usually have it and are that much noisier. 
For example, my wife's 08 Honda CRV is very nice but has lots of road noise
whereas a Acura RDX or BMW X3 is much quieter due to the extra insulation (you
can also tell the difference because these quieter vehicles are 3-500lb
heavier but not visibly larger). 
 
The heat reflecting benefit of the foil facing is so-so after a few hours of
thermal soaking.  The best thermal insulation comes from dead air space
between the metal and the passenger (assuming we're talking inside the
cockpit).  Thick foam rubber or fiberous blankets are what works there.  Thin
fiberglass stick on material is simply not as effective.
Regards,
Joe Mulqueen
(who insulated the most noisy British vehicle made - a '67Landrover SIIA 109
SW)
 
'60 BT7 project
 
 
 
 
 
Message: 8
Date: Sun, 28 Jun 2009 07:18:57 -0700
From: "Douglas Lyon" <lyon612@verizon.net>
Subject: Re: [Healeys] Heat Barrier Cloth vs Dynamat
To: "Alan Seigrist" <healey.nut@gmail.com>,    "Healey"
    <Healeys@autox.team.net>
Message-ID: <9D76F0C85F8141B0ABBCC9AFCD4BBE30@lyon1>
Content-Type: text/plain; format=flowed; charset=iso-8859-1;
    reply-type=original

Alan,

I would also be leery of adhering the insulation material to the
floorboards.   When I get that far in my project, I'm thinking of either
laying the insulation in loosely, or perhaps gluing it to the under side of
the carpet.

Douglas Lyon
Claremont, CA

'59 BN7

----- Original Message -----
From: "Alan Seigrist" <healey.nut@gmail.com>
To: "Healey" <Healeys@autox.team.net>
Sent: Friday, June 26, 2009 6:19 AM
Subject: [Healeys] Heat Barrier Cloth vs Dynamat


> All -
>
> I have been mulling about the various materials I can put on my
> floorboards
> to keep the BJ8 cool.  I actually bought some Dynamat, but I'm having
> second
> thoughts about putting that super sticky stuff on my floor and what it'll
> mean for rust in the future.
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>
  • [Healeys] re. Heat Barrier Cloth vs Dynamat, joe mulqueen <=