healeys
[Top] [All Lists]

Re: [Healeys] Wood Steering wheel

To: Gary Olson <gwo@pacbell.net>
Subject: Re: [Healeys] Wood Steering wheel
From: Bob Spidell <bspidell@comcast.net>
Date: Thu, 13 Aug 2009 06:04:26 -0700
You can reduce the steering force considerably by replacing the stock king pin 
trunnion thrust bearings with Torrington roller bearings.

Bob


Oudesluys wrote:
> Going from 16,5 to 15 inch will give an increase of around 10% in force 
> needed for the steering wheel. Its is not an awfull lot and manageble. 
> It will make getting in and out a bit easier.
> An even smaller wheel will neccessitate  body building classes.
> Kees Oudesluijs
> 
> Gaagten schreef:
>> Hello list,
>> I consider to install a wood steering wheel from Lempert. I have the 
>> original
>> A-H BJ8 wheel, from which I think the diameter is 16.5 inch.
>> However I have very limited space between steering wheel and leg. What 
>> would
>> be the best diameter to order, 15 inch would give much heavier 
>> steering. Is
>> this correct.?
>>
>> Thanks for yr input.
>>
>> Ge Aagten
>> BJ8
>> THe Netherlands



-- 
*******************************************************************
Bob Spidell           San Jose, CA            bspidell@comcast.net

*******************************************************************
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>