healeys
[Top] [All Lists]

[Healeys] Need A Fix

To: <healeys@Autox.Team.Net>
Subject: [Healeys] Need A Fix
From: "Mark LaPierre" <lapierrem@sbcglobal.net>
Date: Thu, 13 Aug 2009 18:24:52 -0400
My newly installed doors are looking pretty good considering were they were 6
years ago.
However one door will only open from the outside latch.  The inside door
mechanism needs
a skosh more pull to release the door latch.   Theres only 3 parts here, the
door handle unit,
the latch unit and the flat bar that connects these 2 units.

I don't see any obvious wear on these parts and there really isn't any room
for adjusting the
front and rear door mechanisms that I can see.  They are secured directly to
the door by machine screws.

Any suggestions on what or  where  I can adjust to take up the slack.

Thanks  Mark
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>