FWIF, I lowered mine by having the springs de-stressed by a commercial spring
place. They wanted to know how much I wanted and I guessed at about 20%----the
result was perfect for me. I do not like the high rear look of the P2 BJ8.
tom
---- PG <britishcars@shaw.ca> wrote:
=============
To lower a phase 2 BJ8, it is common to put metal blocks between the axle
and the springs. It gives a much nicer stance to the car..similar to a
phase 1 BJ8.
Does anybody know the thickness of the blocks used? I'm thinking of about
1"
Paul
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
You are subscribed as tomfelts@windstream.net
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|