[Healeys] Confusion - was King Pin with needle bearings

["Steve Gerow" <steveg@abrazosdata.com>]

I'm confused - are we discussing the needle upper-trunnion thrust bearing or
is it a lower bushing replacement?

 

David Nock wrote:
there isnt a torque reading for the upper trunnion. But the process  
is the same as the wheel bearings. You will add or subtract shims  
until you have about .003 end float. You want it to have no movement  
but no drag when the trunnion is tightened.



 

--

 

Steve Gerow

Pasadena, CA, USA

BN6
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive