If anyone could send me the part number of that tri-carb heatshield i
probably have a DXF drawing of it.
On Wed, Jan 20, 2010 at 2:25 AM, Greg Wilkinson <
gregwilkinson@roadrunner.com> wrote:
> I have a neighbor with a Tri-carb. It might be a while before I see his car
> though (he doesn't store it at his house). If someone wants to do a pencil
> sketch with the dimensions, I can do up a drawing like the BJ8 ones.
>
>
> -----Original Message-----
> Somebody needs to come up with the pattern for the tricarb under floor heat
> shield panel. It's similar to that of the BJ8 but is about 5 1/2" longer at
> the back of the panel with different spacings. I suspect the one for the
> BJ7
> may be similar. The BJ8 one probably had to be shorter at the back edge to
> clear the pair of exhaust mounts that mount on studs through the floor just
> ahead of the rear left outrigger.
>
> Rich Chrysler
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as msalter@precisionsportscar.com
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|