I think you mean Helicoil thread inserts.
You know, I think there may be another solution. XKs Unlimited in San Luis
Obispo sells an oversize exhaust stud which protrudes at a standard size.
The studs on a Jag XK Motor and the Austin Motor are basically the same:
Go here:
http://www.xks.com/jaguar/catalog/pdf/JaguarCatVol15_197_209.pdf
and look at part number C2369/1 on page 197. If the shank's too long you
can run a die on it, but I think it should be ok. Only $4.
Alan
'52 A90
'53 BN1
'59 Jag Mk IX
'64 BJ8
On Fri, Mar 12, 2010 at 7:30 AM, S and T Miller <stmiller96@hotmail.com>wrote:
> Anyone recall the product's name that someone used on a questionable
> manifold
> stud? Checked archives, but couldn't find it. Thanks, Shawn
>
> The Millers
> "British Car Nuts"
>
> 1957 Austin Healey 100-6 BN4 35299
>
> 1959 Austin Healey 100-6 BN4 77219
>
> 1964 MGB 40841
>
> 1960 Austin Healey Bugeye Sprite AN5 34351
>
> "Always drive them, but remember each drive in an antique car is a test
> drive."
>
>
>
> _________________________________________________________________
> Hotmail: Trusted email with powerful SPAM protection.
> http://clk.atdmt.com/GBL/go/201469227/direct/01/
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|