ed, after the vet has done his work and the nut is off, take a close look at
the harmonic balancer and pulley. if you see a groove where it slides into the
seal, you will have to polish it out or put a stainless steel sleeve over it.
if you put a new seal in and that groove is still there, the new seal will
begin to leak toot sweet. ask me how i know. hjim
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|