healeys
[Top] [All Lists]

[Healeys] Fitting the armrest pad on BN2

To: <Healeys@autox.team.net>
Subject: [Healeys] Fitting the armrest pad on BN2
From: "T+ B Willig" <willig@wtnet.de>
Date: Fri, 2 Apr 2010 21:53:38 +0200
In the Anderson-Moment book is written on page 52

 

"A jute pad covering about 70 percent of the tunnel was glued to the
underside of the tunnel carpet". Has anybody taken sketches of the outline
of this jute pad?

 

Further on it reads: "Tenax snap studs, to which the armrest pad front
corners were snapped, were fastened to the carpet cover." Is this correct?
Are the Tenax studs really screwed onto the carpet?

 

Please advise 

 

 

Thomas
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>