We're sealing this joint from the inside. Inside the boot, and under the
Armacord should NOT be a place where water can get to.
Rich
--------------------------------------------------
From: "john spaur" <jmsdarch@sbcglobal.net>
Sent: Thursday, April 15, 2010 11:31 PM
To: <healeys@autox.team.net>
Subject: [Healeys] Rear shroud at boot floor
> Are people sealing the seam inside the boot between the steel and aluminum
> or leaving it unsealed to drain?
>
> TIA,
> John Spaur
> '62 BT7
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/richchrysler@quickclic.net
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|