healeys
[Top] [All Lists]

Re: [Healeys] BJ7/BJ8 Distributor

To: Ron Huseman <ronhuseman@sbcglobal.net>
Subject: Re: [Healeys] BJ7/BJ8 Distributor
From: Michael Salter <msalter@precisionsportscar.com>
Date: Tue, 27 Apr 2010 07:43:26 -0400
I have lots of the drive units that you are looking for. How about $50 +
shipping.
Michael Salter

On Mon, Apr 26, 2010 at 9:54 PM, Ron Huseman <ronhuseman@sbcglobal.net>wrote:

> Healey List:
>
>
>
> Almost 5 years ago, I started on a restoral of a true 'basket case' BJ7. I
> had never restored a LBC before and the parts I began with were simply a
> pile of rusted junk. Thanks to the advise, parts and encouragement many of
> you made, the car is now fully restored and running like a champ.
>
>
>
> However, I have one last issue that I want to resolve before the car is
> deemed "completed". Everything in the car is truly a "BJ7" part, either
> restored from the original car, or scavenged from many of you who assisted
> me in my efforts. The engine block I had was from a BJ8. I was told that it
> was the same block as my BJ7, but with some bigger carbs, etc. so I used
> it.
> At the time I didn't realize it, but the tach on an 8 is electronic, and
> the
> 7 is mechanically driven by a unit between the block and the distributor.
> Since I have a BJ8 engine, the distributor had no drive for the tach cable.
> The distributor now in the car is a 25D and works just fine..however, the
> tachometer sits there and looms at me from the dash like a sick puppy
> wondering why it's not being fed!
>
>
>
> Is there a distributor/drive part that I can buy that fits the BJ8 drive
> gear and also has the mechanical drive unit I see on other BJ7s? Is the
> mechanical drive unit I need a part that will fit between the BJ8 drive
> gear
> and the 25D distributor? I'll replace the current distributor is I have to.
> When I look at the available drawings and photos of my distributor vs that
> of a BJ8, it seems like there is no difference. I just do not see the
> mechanical drive unit on either of the documentation I have.
>
>
>
> Can someone explain to me what I need to make this work??
>
>
>
> Thanks to all of you who have so generously contributed to my slow,
> cumbersome efforts to restore this beautiful car. I call her "MYRTLE" after
> my maternal grandmother. She too was fickle and demanding, but well worth
> knowing. (She also lived to be 100!)
>
>
>
> Ronald Huseman
>
> ronhuseman@sbcglobal.net
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage <http://www.team.net/forums%0AUnsubscribe/Manage>:
> http://autox.team.net/mailman/options/healeys/msalter@precisionsportscar.com
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>