Bob -
I think the difference is the earlier mounts use BSF studs and the
later ones UNF. I believe the later BMC mounts oficially superscede
the earlier Austin ones. I know where you can get the BSF ones...
Alan
On 4/27/10, Bob Spidell <bspidell@comcast.net> wrote:
> Listers,
>
> According to the pictures in the Moss catalog, a 100 engine has
> different mounts than a 100-6 or 3000's. Yet, the mounts on our BN2
> (100M) look more like those from a 100-6/3000. Everything else on this
> car is pretty much original--was there a point at which a later style
> mount was used on 100s?
>
> Also, did the 100s come with an engine ID plate like the sixes?
>
> TIA,
> Bob
>
> --
> *******************************************************************
> Bob Spidell San Jose, CA bspidell@comcast.net
>
> *******************************************************************
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com
>
--
Sent from my mobile device
Alan
'52 A90
'53 BN1
'59 Jag Mk IX
'64 BJ8
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|