My concern is the plastic window being damaged because it's larger than the
original window, but after the responses I received I followed the
instructions in the owner's handbook and just made sure that only the
material was folded - and not the window. Tight, but it does work. Thanks
everyone.
Charlie
-----Original Message-----
From: Rich C [mailto:richchrysler@quickclic.net]
Sent: Sunday, May 09, 2010 1:44 PM
To: Charlie O'Connors; Healeys@autox.team.net
Subject: Re: [Healeys] Stowing a Robbins Top
Charlie,
It's all described step by step with photos in the original Owners Handbook
and in the original BMC Workshop Manual. I followed the recommended
procedure hundreds of times over the years both in my own old BT7 and in
showing others and it works out perfectly.
Rich
--------------------------------------------------
From: "Charlie O'Connors" <charlieoc@comcast.net>
Sent: Sunday, May 09, 2010 11:59 AM
To: <Healeys@autox.team.net>
Subject: [Healeys] Stowing a Robbins Top
> I have a Robbins top on my 1960 BT7 and it is a fantastic top. But, can
> someone tell me if there is a way for me to stow the top behind the squab
> without causing damage to the rear window?
>
>
>
> Thanks,
>
>
>
> Charlie O'Connors
>
> Tallahassee, Florida
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/richchrysler@quickclic.net
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|