Yes, that's the BJ8 brake master....
On 5/24/10, warthodson@aol.com <warthodson@aol.com> wrote:
> Follow up to the Heavy clutch question.
> We removed the clutch master cylinder & discovered that it was a 7/8" bore
> which is two sizes larger than a stock BJ7 clutch master cylinder. We
> installed the stock cylinder & as you would expect, the pressure required to
> operate the clutch was dramatically reduced.
> Thanks,
> Gary Hodson
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com
>
--
Sent from my mobile device
Alan
'52 A90
'53 BN1
'59 Jag Mk IX
'64 BJ8
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|