healeys
[Top] [All Lists]

[Healeys] Not Healey - Jaguar XK 150 Brakes

To: "healeys@autox.team.net" <healeys@autox.team.net>
Subject: [Healeys] Not Healey - Jaguar XK 150 Brakes
From: Jonas Payne <jpayne@ThorCon.net>
Date: Thu, 27 May 2010 07:20:00 -0700
Not sure what the etiquette is for asking non Healey Questions........

Have recently replaced the entire hydraulic system on my Jag xk 150, The car
has a servo, which I have plumbed in, but did not attach the vaccum line to.

Also replaced the master cyl with an "equivalent" unit that showed up with a
pushrod that was way too short, so I reused the old rod and attempted to set
up at the same length.

Brakes will not release and remain firmly clamped on discs after bleeding.
The car won't even move.  Is the problem not having the servo hooked up or
related to the adjustment of the master cylinder rod?

Jonas Payne
Director of Preconstruction
Thor Construction
PH:    (702) 269-2007
Fax:   (702) 269-7095
Cell:   (702) 358-5084



"This email and any attachments are confidential and intended solely for the
use of the individual or entity to whom they are addressed.  If you have
received this email in error please contact the sender(s) at (702) 269-2007
and delete all copies from your system.  It is not the intent of the sender to
solicit any person or business.  Please note that any opinions in this email
are solely those of the author and do not necessarily represent those of Thor
Construction, Incorporated.  Finally, the recipient should check this email
and any attachments for the presence of viruses.  The company accepts no
liability for any damage or loss caused by any virus transmitted by this
email."
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>