healeys
[Top] [All Lists]

[Healeys] Brake/Clutch Reservoir inside washer?

To: <tjmorrio@colby.edu>
Subject: [Healeys] Brake/Clutch Reservoir inside washer?
From: "Mr. Finespanner" <mrfinespanner@earthlink.net>
Date: Tue, 15 Jun 2010 19:41:34 -0700
Tom,
There is a thin rubbery washer underneath the clutch reservoir cylinder, and
as you can see it does deteriorate.  I always replace it with a copper 
washer,
which holds up much better.  The concours judges will never see it.
regards,
Doug Reid, 18G Motorworks


>Message: 5
>Date: Mon, 14 Jun 2010 21:55:54 -0400
>From: Thomas Morrione <tjmorrio@colby.edu>
>Subject: [Healeys] Brake/Clutch Reservoir inside washer?
>To: Healey List <healeys@autox.team.net>
>Message-ID: <C83C55EA.586C%tjmorrio@colby.edu>
>Content-Type: text/plain; charset="us-ascii"
>
>Folks,
>
>I9m rebuilding my BJ8 clutch/brake reservoir and see there9s an aluminum
>washer on the outside of the can for the clutch and brake line nipples. But
>on disassembly I found a black substance inside the can between the clutch
>(small) cylinder reservoir bottom and the can inside bottom. It looks like 
>a
>very thin washer of some sort perhaps butyl or neoprene.  I9ve looked in
>the archives and see no mention of it and Moss doesn9t list the part.
>Helpful listers I9ve asked have suggested making one which I can do but
>my question is - is it supposed to be there or is this likely just residue
>from some sealant? (if it is what9s best to use?) There9s no washer inside
>the can for the brake line.
>
>TIA,
>Tom
>BJ8 65 in process 
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>