There will not be any change in the pedal travel to release the
clutch. Since you are not changing anything in the hydraulic system.
You are still moving the same amount of fluid from the same size
cylinders as original.
Now if you change the master cylinder size you will have a problem
with travel.
David Nock
British Car Specialists
Stockton Ca 95205
209-948-8767
www.britishcarspecialists.com
.
.
On Jun 18, 2010, at 5:47 AM, warthodson@aol.com wrote:
> Just a reminder to anyone contemplating reducing the clutch pedal
> pressure by relocating the push rod pick up point or using a
> smaller master cylinder, there will be an increase in pedal travel
> required.
> Gary Hodson
>
>
>
> -----Original Message-----
> From: PG <britishcars@shaw.ca>
> To: 'David Nock' <healeydoc@sbcglobal.net>; 'Healey List List'
> <healeys@autox.team.net>
> Sent: Fri, Jun 18, 2010 1:03 am
> Subject: Re: [Healeys] Reducing pedal pressure for clutch
>
> Hi David,
>
> What do you mean "drilled .5" higher"?
>
> Paul
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|