healeys
[Top] [All Lists]

Re: [Healeys] clutch - Need Help please

To: britishcars@shaw.ca, healeys@autox.team.net
Subject: Re: [Healeys] clutch - Need Help please
From: warthodson@aol.com
Date: Sun, 18 Jul 2010 09:03:32 -0400
When mating the bellhousing to the engine did you use the two special dowel
bolts that are original?  Apparently, the factory felt the precise location of
the transmission input shaft to the pilot bushing was critical. I don't think
letting it wear in is going to make the problem go away, if indeed that is the
source of the problem. I can understand your frustration at this point. Did
you modify anything we should know about? Where did you get your replacement
pilot bushing? Is it fully installed (I.E. all the way in the crank?)
Gary Hodson





_______________________________________________
ealeys@autox.team.net
onate: http://www.team.net/donate.html
uggested annual donation  $12.75
rchive: http://www.team.net/archive
orums: http://www.team.net/forums
nsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/warthodson@aol.com
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>