You may need a band clamp to limit spreading of the bottom of the
tool cut. We could debate 12 pt. versus 6 pt. which provides a better
grip but limits wrench movement.
John
At 08:50 PM 8/10/2010 -0400, you wrote:
>Ken,
>
>It will need to be cut to about 4-5 inches length. Also a 12 point
>not a 6 point.
>
>Keith
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|