healeys
[Top] [All Lists]

Re: [Healeys] Aluminum Rads

To: "warthodson@aol.com" <warthodson@aol.com>
Subject: Re: [Healeys] Aluminum Rads
From: "Curt/Nancy Arndt" <cnaarndt@gmail.com>
Date: Thu, 26 Aug 2010 15:27:56 -0700
Gary,

I believe that radiator tanks and the rods are brass and the fins only are
copper.  Steel was used on the supports and framework.

Curt

On Thu, Aug 26, 2010 at 2:25 PM, warthodson@aol.com <warthodson@aol.com>wrote:

>  Gary,
> I thought the original radiators were copper cores & fins with brass tanks,
> not steel. Copper is more efficient than aluminum at heat transfer. As for
> weight savings,
> I was considering an aluminum radiator for for the weight savings for my
> BJ8
> until I ask one of the suppliers how much their aluminum radiator weighted.
> I
> don't recall the exact weights but the aluminum radiator was, much to my
> surprise, only about 5 Lbs. lighter than the stock radiator which was not
> enough savings to justify the high cost since I was not going to race the
> car.
> Gary Hodson
>
> I'll probably get corrected by some metallurgist with an advanced degree in
> hermodynamics, but my understanding is that aluminum is actually less
> fficient at heat transfer than steel. However, because of the reduced
> weight,
> lly rads are preferred in racing
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage <http://www.team.net/forums%0AUnsubscribe/Manage>:
> http://autox.team.net/mailman/options/healeys/cnaarndt@gmail.com
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>