The old timers like Malcom Terry taught us to tap the hole and run a
machine screw up through the bottom to act as a stop. Worked for me!
Jim Werner
In a message dated 8/27/2010 5:34:00 P.M. Eastern Daylight Time,
rantal243@yahoo.com writes:
Thanks for all the suggestions provided last week regarding the problem I
was
having with the OD on my BJ8. I've read in a few places and someone
mentioned
that a 1/8th inch thick rubber bumper should be located somewhere under
the OD
plunger that lifts the rod that activats the OD. I can't find this rubber
piece
in the parts manual. Is this a home made fix and if so, exactly where is
this
rubber piece placed and how is it secured in place? Thanks much.
rich antal
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/jwhlyadv@aol.com
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|