Isn't the gear box tunnel welded to the floor? It is on my BT7. Did you mean
tranny cover?
On Sat, Sep 11, 2010 at 11:09 AM, Michael Salter <
msalter@precisionsportscar.com> wrote:
> Hi Richard, most likely cause is the outer of the cable having pulled
> through its locating bracket inside the tunnel.
> This is a real bear to fix requiring the removal ot the driveshaft and the
> gearbox tunnel at the very least.
> Michael Salter
>
> On Sat, Sep 11, 2010 at 11:42 AM, Richard Kahn <tahoehealey@hotmail.com
> >wrote:
>
> > I need some quick advice. I am not where I can raise the car. Drove the
> > BJ8
> > this morning and parked on a sight hill. The hand break did not catch and
> > pulled all the way back. It does have the ratchet sound but no action.
> I'm
> > thinking a clevis pin at the front of the line. I cannot get under to see
> > that
> > area but the rear looks OK. Has anyone had this experience? Is there any
> > other
> > possible cause besides a broken cable?
> > Thanks
> > Rich Kahn
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage <http://www.team.net/forums%0AUnsubscribe/Manage>:
> http://autox.team.net/mailman/options/healeys/eyera3@gmail.com
>
--
Ira Erbs
DIGS-4 SOLUTIONS
IT CONSULTANTS
Portland, OR
_______ _______
(______ \____1960 BT7____/ _______)
(_________________________)
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|