healeys
[Top] [All Lists]

Re: [Healeys] 3000 engine mounts

To: <warthodson@aol.com>, <oldsamdman@aol.com>, healeys
Subject: Re: [Healeys] 3000 engine mounts
From: richard mayor <mayorrichard@hotmail.com>
Date: Thu, 14 Oct 2010 01:05:13 +0000
The 3000 - 100/6 engine mounts are handed -  they are marked either LH or RH.
There is a time period where the mounts were made with slotted holes so that
they could be used on either the right or the left hand side. I do not know
when these slotted versions were made, but they are very apparent to the eye.
Perhaps they were the solution to people not realizing the handed properties
of the mounts and installing them incorrectly. It is not readily apparent that
the /handed mounts are different.


Richard Mayor
BN7L-466  Vintage Racer
Portland, Oregon




To: mayorrichard@hotmail.com; oldsamdman@aol.com; healeys@autox.team.net
Subject: Re: [Healeys] 3000 engine mounts
Date: Wed, 13 Oct 2010 10:21:24 -0400
From: warthodson@aol.com








It has been awhile since I looked into this so I don't recall all the details,
but there was a point in time when the right & left mount assembly was not
handed, then the later cars (as I recall) had handed (right & left) mount
assemblies. Even on the handed assemblies some of the component parts are
identical, not handed. Only part of the assembly is handed.


That really clears it up doesn't it!


Gary Hodson











-----Original Message-----

From: richard mayor <mayorrichard@hotmail.com>

To: oldsamdman@aol.com; healeys <healeys@autox.team.net>

Sent: Tue, Oct 12, 2010 8:44 pm

Subject: Re: [Healeys] 3000 engine mounts





They are identical.

Richard Mayor
 assemplyBN7L-466  Vintage Racer
Portland, Oregon




> To: Healeys@autox.team.net
> Date: Tue, 12 Oct 2010 20:12:35 -0400
> From: oldsamdman@aol.com
> Subject: [Healeys] 3000 engine mounts
>
>   Gentlemen,
>
>     Can anyone tell me what the differences may be between 100/6 engine
mounts
> and 3000 engine mounts?  Just looking at parts illustrations in Moss it
seems
> all brackets are the same except the left side bracket that bolts directly
to
> the block - What is the difference and will 100/6 brackets work just as
well?
>
> Thanks,
>
> Bob Huston
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/mayorrichard@hotmail.com
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/warthodson@aol.com
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>