healeys
[Top] [All Lists]

[Healeys] Lucas 4.7mm bullets - finishing touches

To: Healey <Healeys@autox.team.net>
Subject: [Healeys] Lucas 4.7mm bullets - finishing touches
From: Alan Seigrist <healey.nut@gmail.com>
Date: Mon, 1 Nov 2010 08:15:40 +0800
All -

I may have asked this before, but are any of you aware of anyone that might
sell the finishing crimpers for the solder bullets - if you look at your OEM
harnesses you will see that most of the bullets have a really nice rounded
back end to them.

Most suppliers still sell the bullets, but I can't seem to find anyone who
sells the crimper that folds the back end of the bullet so nicely against
the wire's insulating sleeve.

I'm a bit of a stickler when it comes to wiring so I was hoping someone out
there might have an idea.

I have a proper hex crimper for the crimp type bullets, I don't need one of
those.

Best Regards,

Alan
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>
  • [Healeys] Lucas 4.7mm bullets - finishing touches, Alan Seigrist <=