Actualyl, I have rebuilt two of my BJ8 switches with no problem. Pretty simple
and straight forward. However, I carry new switches on the boot. They lack the
patina of age but I know its only a matter of time till the plastic toggle
goes.
Rich Kahn
> Date: Sun, 31 Oct 2010 08:52:10 -0400
> To: healeys@autox.team.net
> From: pdeturck@rochester.rr.com
> Subject: [Healeys] dash switches
>
> I have a couple of switches on myBJ8 dash (notably the
> Panel Lights and Overdrive) which are starting to
> fail. They seem to work most of the time but if the
> actuator is moved side to side even a little bit the
> internal connections seem to disconnect when
> the switch is actuated. The wire connections on the
> back are tight and clean.
>
> Can these switches be rebuilt in any way?
> Are "new" switches similar in appearance and tactile feel?
> Does anyone have any NOS available?
> Thanks.
> -pd-
> '66 BJ8
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/tahoehealey@hotmail.com
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|