healeys
[Top] [All Lists]

Re: [Healeys] 26H engine

To: peter svilans <peter.svilans@rogers.com>, <healeys@autox.team.net>
Subject: Re: [Healeys] 26H engine
From: Jim Lesher <cleona44@hotmail.com>
Date: Mon, 20 Dec 2010 14:46:07 -0500
Y - thanks for your wisdom, and Sheesh? as always.
 I actually do have the same remarks directly from Clausager about the "1" vs
the "I".

The only thing I can say is that there appears to be more Longbridge BN4 2
portheads out there with the "I" rather than the "1" on the engine plate.

but again so much for Healey trivia - jim lesher



> From: peter.svilans@rogers.com
> To: healeys@autox.team.net
> Date: Mon, 20 Dec 2010 12:46:58 -0500
> Subject: [Healeys] 26H engine
>
> Make this up, did not I .
>
> The breakdown of chassis and engine numbers is found in most period factory
> Workshop Manuals for all the various BMC models. They all clearly state
that
> the "H" stands for "Miscellaneous SPECIAL".
>
> What's the rest of the number, by the way? What does it have for gearbox
info
> ? If "26H" is the only thing on the plate, it would confirm that its
> something out of the ordinary. I'd be all over that motor with a fine-tooth
> comb.
>
> And Jim, Clausager refers to the "1 C" number, written like that, in a
couple
> of places, including the engine numbers chart on p.57. Maybe yours is a
Roman
> Numeral "1", like in Spitfire Mark IX, or maybe the guy lost his punch and
> used the "I". Sheesh.
>
> Force-fully yours
> Y.
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/cleona44@hotmail.com
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>