I prefer to use lowish loads on the relays for better reliability. They
cost next to nothing. The 50A fuse may be a bit to heavy, you are
correct, but 20A is a bit tight as you have a surge when switching on
the lights as the filaments heat up. I settle for 30A total or 15A per
relay.
High beam usually is 80A,dip light 100A.
Kees Oudesluijs
[demime 1.01d removed an attachment of type text/x-vcard which had a name of
coudesluijs.vcf]
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|