healeys
[Top] [All Lists]

[Healeys] Voltage Stabilizer from Moss

Subject: [Healeys] Voltage Stabilizer from Moss
From: ynotink at msn.com (WILLIAM B LAWRENCE)
Date: Thu, 3 Feb 2011 04:00:09 +0000
References: <001101cbc2fc$de8b2840$4001a8c0@markl946cfrd7q>, <55F39B7518D14BFD9C8B9AAFF0DDAE9D@JerryPC>
If you are going to use a voltage stabilizer you will need to change the gauge
and sensor too.
Bill Lawrence

> From: grumpyinloomis at ssctv.net
> To: healeys at Autox.Team.Net
> Date: Wed, 2 Feb 2011 09:32:41 -0800
> Subject: Re: [Healeys] Voltage Stabilizer from Moss
>
> I tried it without success.   IE:  the fuel gauge did not change.    This
> stabilizer actually drops the voltage to 10 volts.
> My gauge still was full at 5/8 of a tank and did not change any minor
> fluctuation.   I do have an extra ground wire from the sender unit to the
> body.
>
> Jerry
> BJ8
>
> -----Original Message-----
> From: Mark LaPierre
> Sent: Wednesday, February 02, 2011 9:16 AM
> To: healeys at Autox.Team.Net
> Subject: [Healeys] Voltage Stabilizer from Moss
>
> Has any one tried or have an opinion on the modified voltage stabilizer
that
> Moss
> is selling # 131-555.  This is similar in appearance to what was used on
> MGBs,
> I am interested in trying this to stabilize my fluctuating Healey fuel
> gauge.
>
> Anyone?
>
> Thanks,  Mark
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/ynotink at msn.com

<Prev in Thread] Current Thread [Next in Thread>