healeys
[Top] [All Lists]

[Healeys] Quaife in a Sprite

Subject: [Healeys] Quaife in a Sprite
From: bighealey at charter.net (Tracy Drummond)
Date: Fri, 4 Feb 2011 16:27:21 -0800
Consider a Mazda rear end.  Brian Bliven has a great set up for this.

Warm Regards,

Tracy Drummond

PMP | ITIL Service Manager | CISSP | bighealey at charter.net | 408-394-3444
cell | 408-776-0133 home | http://www.linkedin.com/in/tracydrummond

-----Original Message-----
From: healeys-bounces at autox.team.net [mailto:healeys-bounces at 
autox.team.net]
On Behalf Of warthodson at aol.com
Sent: Friday, February 04, 2011 3:51 PM
To: healeys at autox.team.net
Subject: [Healeys] Quaife in a Sprite

A friend with a Sprite wants to have a Quaife limited slip diff. installed
in
a 3.90 Sprite Diff. but has been told it won't fit because there is an
interference between the Quaife & something inside the diff. housing. It
will
fit in other Sprite diff's, but there is something unique about the 3.90. I
am
not familiar with this issue but said I might be able to find some help on
this list or perhaps someone could post the question on the Sprite list &
forward me any comments.
Thanks,
Gary Hodson
_______________________________________________
Healeys at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/bighealey at charter.net

<Prev in Thread] Current Thread [Next in Thread>