You're right - I forgot. They only work on the BJ8....
On 3/13/11, Mark LaPierre <lapierrem@sbcglobal.net> wrote:
> I had a tr6 cap once but it wouldn't fit on my dm6 distributor. That cap
> only seems to fit the later
> distributors.
>
> Mark
>
> ----- Original Message -----
> From: "Alan Seigrist" <healey.nut@gmail.com>
> To: <healeymanjim@hansencc.net>; <healeys@autox.team.net>
> Sent: Saturday, March 12, 2011 9:52 PM
> Subject: Re: [Healeys] wire core plugwire
>
>
>> It's better to use the TR6 cap with pre made suppression core wires.
>> That's how you get the suppression core wire to last if you want to
>> use them.
>>
>> Carbon core wires never last very long in the original Lucas cap
>> because the wires aren't designed to work with a pointed male screw
>> terminal.
>>
>> Alan
>>
>> On 3/13/11, healeymanjim@hansencc.net <healeymanjim@hansencc.net> wrote:
>>> i have always had wire center plugwires. i assume that is why i have a
>>> lot
>>> of static on my radio, but then it has static even when the motor is off.
>>> aren't most carbon center wires too big for the distributor cap openings?
>>> hjim
>>> _______________________________________________
>>> Healeys@autox.team.net
>>> Donate: http://www.team.net/donate.html
>>> Suggested annual donation $12.75
>>> Archive: http://www.team.net/archive
>>> Forums: http://www.team.net/forums
>>> Unsubscribe/Manage:
>>> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com
>>>
>>
>> --
>> Sent from my mobile device
>> _______________________________________________
>> Healeys@autox.team.net
>> Donate: http://www.team.net/donate.html
>> Suggested annual donation $12.75
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/healeys/lapierrem@sbcglobal.net
>
>
--
Sent from my mobile device
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|