Definitely stranded... Maybe there are some newer tech wires out there
that might work, but standard carbon core is a bad idea.
On 3/13/11, Mark LaPierre <lapierrem@sbcglobal.net> wrote:
> I picked up an NOS top load, dissy cap that has the black bakelite "screw
> in"
> caps and copper washers for all the plug wire holes. Has anyone tried to
> use
> the carbon wires with
> this type of cap? Normally its necessary to spread the individual wires
> over
> the
> copper washer before you screw the bakelite screw caps in. But its not
> really
> possible
> to spread the carbon wires like that. Can the carbon wire just be bent in
> one
> direction and screwed down? Or are the old stranded wires the only way to
> go
> with this cap?
>
> Mark
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com
>
--
Sent from my mobile device
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|