Thats a very good question. BJ8 used bolts. However, Moss's new wire
wheel adapters now use bolts even for the roadster 3000. I found that out
a bit late after attempting to install the studs that would not fit. After
contacting Moss they let me know of the change. Almost destroyed one of my
hubs in the process.
Mark
----- Original Message -----
From: <warthodson@aol.com>
To: <bspidell@comcast.net>; <healeys@autox.team.net>
Sent: Sunday, March 13, 2011 5:20 PM
Subject: Re: [Healeys] Rotor Bolts
>I thought those "bolts" are actually studs that are pressed into the hub.
>The
> unthreaded portion of the stud has splines which should prevent them from
> turning when you tighten the nuts.
> Gary Hodson
>
>
Manage:
http://autox.team.net/mailman/options/healeys/lapierrem@sbcglobal.net
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|