We have installed both, and they both seem to work as well as each
other. The problem we have had with the Koolmat is that nothing will
stick to it. What you are going to use as carpet insulation you will
have to get some good glue to install it. If you use the Dynatmat
material you can use their Dynaliner which has a peel a stick backing
and sticks right in place.
David Nock
British Car Specialists
Stockton Ca 95205
209-948-8767
www.britishcarspecialists.com
.
.
On Mar 30, 2011, at 4:59 PM, Tadeusz Malkiewicz wrote:
> I did some research about 1.5 years ago and I went with Kolmat. It's
> silicone based. Photos are at
> https://picasaweb.google.com/Volvo1800S/AssemblyPhase2#
>
> I read about it on few other lists and I think I was finally
> convinced by
> someone doing an e-type with it. I also saw it installed in my
> friend's
> e-type and I have to say heat is not a problem there, despite a V12..
>
> I also use felt though.
>
> Tadek
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/
> healeydoc@sbcglobal.net
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|