healeys
[Top] [All Lists]

Re: [Healeys] Tank sender sealant

To: "Mark LaPierre" <lapierrem@sbcglobal.net>, <healeys@autox.team.net>
Subject: Re: [Healeys] Tank sender sealant
From: "Peter & Veronica" <greylinn@ozemail.com.au>
Date: Fri, 1 Apr 2011 09:17:45 +1000
Thanks for all the responses - seems like I'll stick with Hylomar. I should 
have known how it works after all this time!

Cheers

peter

-----Original Message----- 
From: Mark LaPierre
Sent: Friday, April 01, 2011 8:15 AM
To: healeys@autox.team.net
Subject: Re: [Healeys] Tank sender sealant

Hylomar always remains gooie and runnie.  Its not like a silicone that cures
like rubber.   It is suppose to seal all liquids that
our cars use.   I am referring to the older type of Hylamar not one of the
newer versions that Moss is selling.   They sell 2 now and one of them
sounds like the original.

MARK

----- Original Message ----- 
From: "Peter & Veronica" <greylinn@ozemail.com.au>
To: <healeys@autox.team.net>
Sent: Thursday, March 31, 2011 4:55 AM
Subject: [Healeys] Tank sender sealant


> Gbday list
>
> Ibve just pulled the tank from the V6 car (itbs a custom alloy tank) to
> replace the in-tank fuel pump. This is integral with the gauge sender and
> mounts through a hole in the side of the tank, with a cork gasket under 
> the
> flange. When I first put it together I used my favourite sealant, blue
> Hylomar, which Ibve used for years in most situations (if Rolls Royce use
> it...) Anyway, when I took it apart it seemed to me that the sealant had 
> been
> attacked by the fuel, in that it was soft and came off very easily. can 
> anyone
> advise the best sealant to use where itbs going to be in contact with 
> fuel?
>
> Cheers
>
> Peter Linn
> Brisbane Oz
> BN1 Ward Spl coupe
> BN1 Holden V6
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>