John, take an (empty!) Coke can, cut a piece to cover the hole with a wide
overlap, use a suitable glue and presto!
Jack Aeckerlin, The Netherlands
1964 BJ8 29432
2011/3/1 john spaur <jmsdarch at sbcglobal.net>
> I have a small (3/8") hole in my blower motor casing with some hairline
> cracks radiating from it. I am thinking of using woven fiberglass inside the
> case with urethane.
>
> Is urethane compatible with fiberglass?
>
> How about JB Weld and fiberglass?
>
> Any repair suggestions?
>
> Thank you,
> John Spaur
> '62 BT7
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/j.aeckerlin at gmail.com
|