healeys
[Top] [All Lists]

[Healeys] Chrome type

Subject: [Healeys] Chrome type
From: richchrysler at quickclic.net (Rich C)
Date: Sun, 13 Mar 2011 15:55:14 -0400
References: <6.2.3.4.2.20110312110058.01fe4940@pop.att.yahoo.com> <4D7CE5E8.90308@earthlink.net> <4D7CEB08.8060708@chello.nl> <AANLkTinQdJWMT=07sq_12yWuPi7DeTk9Nqt3hKTTvUCw@mail.gmail.com> <4D7D1DFF.8040102@chello.nl>
The electroplating process resists entering pits and small cavities.
Therefore the usual method of repairing pitted castings, etc. is that each
individual pit must be drilled out clean and then filled with silver solder
and buffed. Then the usual copper, nickel chrome stages are applied. Of
course a casting with many pits is going to be very expensive to process, as
drilling and repairing each pit will be very time consuming.

Rich Chrysler

-----Original Message-----
From: healeys-bounces at autox.team.net [mailto:healeys-bounces at 
autox.team.net]
On Behalf Of Oudesluys
Sent: Sunday, March 13, 2011 3:42 PM
To: Curt/Nancy Arndt
Cc: healeys at autox.team.net
Subject: Re: [Healeys] Chrome type

Curt,
You can get away with it when the irregularities are very small, however 
deep pitting and "waves" cannot practically be dealt with by repeatedly 
electroplating it with copper and sanding. This is only theory.
The only thing I can imagine is lead loading of steel parts first to get 
it smooth but I am not certain this will stand up to the electroplating 
of copper.
Kees Oudesluijs
NL

[demime 1.01d removed an attachment of type text/x-vcard which had a name of
coudesluijs.vcf]
_______________________________________________
Healeys at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/richchrysler at quickclic.net

<Prev in Thread] Current Thread [Next in Thread>