Thanks Michael.
Bill Lawrence
Date: Fri, 18 Mar 2011 07:54:31 -0400
Subject: Re: [Healeys] BT7 windscreen frame
From: michael.oritt at gmail.com
To: ynotink at msn.com
CC: jkrowe46 at bigpond.net.au; healeys at autox.team.net
My soft top has been off the car for a couple of years since I installed a
hardtop. However I am going to take the HT off in a week or so to enjoy some
of Maryland's beautiful spring weather and will send a few pictures to John
Sims who has offereed to host it on its site.
Best--Michael Oritt
On Thu, Mar 17, 2011 at 11:10 PM, WILLIAM B LAWRENCE <ynotink at msn.com> wrote:
While he purists need not comment, they probably will anyway. For my pat I
would like a picture...
Bill Lawrence
> Date: Thu, 17 Mar 2011 08:50:32 -0400
> From: michael.oritt at gmail.com
> To: jkrowe46 at bigpond.net.au
> CC: healeys at autox.team.net
> Subject: Re: [Healeys] BT7 windscreen frame
>
> John--
>
> I did just that on my 100. Rather than using solid steel I used very
> lightweight 1 x 19 stainless steel cable with fittings that you can
> purchase at a good marine supply and swedge on with tools they have on
hand.
> I used a toggle fitting at the top and attached it in place of the buffer
> plate. The bottom end of the cable ends in a threaded terminal which I
pass
> through a small hole in the scuttle just behind the mirror, then tighten
> everything down via a thumbscrew so that the top seals absolutely tight at
> speed.
>
> Purists need not comment.
>
> Best--Michael Oritt
>
> I had thought of running a stainless steel threaded rod from the centre of
> > the top frame to dashboard (as MGB??)
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/ynotink at msn.com
|