healeys
[Top] [All Lists]

[Healeys] Opinions Sought

Subject: [Healeys] Opinions Sought
From: richard.ewald at gmail.com (Richard Ewald)
Date: Sun, 27 Mar 2011 16:19:17 -0700
References: <4D8F9750.2030709@comcast.net> <000001cbecc7$749a7e00$5dcf7a00$@net> <4D8FB0B2.9080402@comcast.net> <000301cbecc9$be81f280$3b85d780$@net>
The level will drop and more than a tiny bit as the pads wear.  It is quite
noticeable in the master.
Getting back to the original question in a perfect world the bore should be
clean as a whistle and dry as a bone. However we are talking about a 6-8 year
old cylinder of Lucas quality in the real world. So here in the real world a
bit (and I do mean a bit) of dampness that took 6-8 years to accumulate is
nothing to be overly concerned about.
If it were me I would clean it up and then recheck it after a few drives.

Sent from my iPhone

On Mar 27, 2011, at 14:55, "Rich Chrysler" <richchrysler at quickclic.net>
wrote:

> Technically, yes, the fluid level in the reservoir will drop a tiny bit
over
> time as brake pads wear and pistons have to reach further out of the bores,
> but hardly enough to notice. This has nothing to do with dampness getting
> past the m/c seal.
>
> Rich
>
>>
>> My question to the List is: am I in danger of imminent/eventual failure of
>> the M/C, or is this no big deal and to be
>> expected, or something in between?
>>
>>
>> Bob
>>
>
>
> --
> *******************************************************************
> Bob Spidell           San Jose, CA            bspidell at comcast.net
>
> *******************************************************************
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/richard.ewald at gmail.com

<Prev in Thread] Current Thread [Next in Thread>