I also did the shroud first like Tadek (I already did it twice) and I would do
it again this way.
To get an excellent finish you need to do the final paintwork on the shroud
when the shroud is already fitted to the car. Then its much better not having
fitted the instrument panel or other parts you need to hide and be careful.
That`s why I am waiting with doing the wiring loom till after the car is
finally painted.
Josef Eckert
-----Urspr|ngliche Nachricht-----
Von: healeys-bounces@autox.team.net [mailto:healeys-bounces@autox.team.net] Im
Auftrag von Tadeusz Malkiewicz
Gesendet: Sonntag, 3. April 2011 03:33
An: healeys@autox.team.net; 'Jose Vicente Vargas'; 'Jose Vicente Vargas';
willig@wtnet.de
Betreff: Re: [Healeys] BN2 body assy order
Thomas,
Are you sure about it?
I had the shroud first, wiper assemly after and last the instrument panel. I
found it very comfortable.
In order to connect all the cabling I first hanged the instrument panel on 2
tie wraps (though the mounting holes for the bolts on each side).
If you do the wiper assembly/ panel/shroud order, then you have to be carful
not to damage the instrument panel with rivets you have to install, and there
is no way you can mount the middle support for the instrument panel & the rear
view mirror..
Tadek
Message: 2
Date: Sat, 2 Apr 2011 09:09:37 +0200
From: "T+ B Willig" <willig@wtnet.de>
Subject: Re: [Healeys] BN2body assy order
To: "'Jose Vicente Vargas'" <jvvmusme@yahoo.com>, "'healey list'"
<healeys@autox.team.net>
Message-ID: <002701cbf104$edcb2db0$c9618910$@de>
Content-Type: text/plain; charset="iso-8859-1"
Hi Jose,
YES! First the instrument panel then the shroud. Also the whole wiper assembly
should be fitted before the shroud will be put on. Other way you will need a
chiropractic after your done....
Good luck
Thomas Willig
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|