healeys
[Top] [All Lists]

[Healeys] Fuse block terminal A3

To: healeys@autox.team.net
Subject: [Healeys] Fuse block terminal A3
From: john spaur <jmsdarch@sbcglobal.net>
Date: Sat, 09 Apr 2011 21:13:10 -0700
1962 MKII BT7

My wiring diagram shows three white wires attached to fuse block 
terminal A3. My wiring harness has four white wires.

One goes to the overdrive relay, one goes to the S.W. connector on 
the ignition coil and one goes to the overdrive switch.

The forth wire is in the wiring harness and follows the same route as 
the wire that goes to the overdrive switch.

My original harness only had three white wires.

What is the purpose of the forth wire?

Thank you,
John Spaur
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>