healeys
[Top] [All Lists]

Re: [Healeys] Healey Heater System

To: <healeyguy@bredband.net>, <healeys@autox.team.net>
Subject: Re: [Healeys] Healey Heater System
From: Jim Lesher <cleona44@hotmail.com>
Date: Wed, 27 Apr 2011 19:29:45 -0400
Those vent tubes were only on the early Longbridge BN4's. By April of 57 the
rubber elbows were in place

jim

> Date: Wed, 27 Apr 2011 20:57:35 +0200
> From: healeyguy@bredband.net
> To: healeys@autox.team.net
> Subject: Re: [Healeys] Healey Heater System
>
> Hi
> If you have a BN4, at least the one I worked with some time ago, then it
> doesn't have those oval holes. Instead they have metal tubes that are
> connected to the vent holes in the dash, the vent tubes attach directly
> to those tubes, e.g. no rubber elbows there. Be careful, those metal
> tubes are located very near the ignition key switch, a fact that had
> caused the wire harness meltdown on the car I worked with. Ended up
> replacing the harness, which was brand new BTW. I isolated the vent
> tube, (or the ignition key switch) with a piece of rubber hose before I
> reattached the battery.
>
> Per
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/cleona44@hotmail.com
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>