Do not cut the pipe. The aluminium adaptor is attached to the top of
the heater box with a star clip that has probalby slipped.
David Nock
British Car Specialists
Stockton Ca 95205
209-948-8767
www.britishcarspecialists.com
.
.
On Jun 6, 2011, at 10:24 PM, I Erbs wrote:
> I bought what was sold as a NOS valve for my BT7 heater. It does
> not seat
> against the o ring and base.
> It bottoms out on the tube. I am figuring to cut down the pipe, but
> want to
> find out if I'm missing something?
> It stops about 1/8" short. I used a dead blow hammer but the
> internal valve
> hits the pipe.
> Thanks
>
> --
> Ira Erbs
> IT CONSULTANT
> Portland, OR
>
> We can't solve problems by using the same kind of
> thinking we used when we created them.
> -Albert Einstein
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/
> healeydoc at sbcglobal.net
|