DO NOT break the heads off It is very difficult to remove the broken
part in the windshield pedestal. When you drill out the broken screw
it is very easy to wander off into the aluminium.
Heat the pedestal and then work the screw out slowly.
David Nock
British Car Specialists
Stockton Ca 95205
209-948-8767
www.britishcarspecialists.com
.
.
On Jun 9, 2011, at 10:26 AM, I Erbs wrote:
> the issue is removing them, when the head snaps off, I will look
> for a tap.
> Thanks
>
> On Thu, Jun 9, 2011 at 10:22 AM, john spaur
> <jmsdarch at sbcglobal.net> wrote:
>
>> They appear to be 36 TPI, but check them with a screw or lightly
>> with a
>> tap.
>>
>>
>> At 06:24 AM 6/9/2011 -0700, I Erbs wrote:
>>
>>> What is the size, pitch of the screws?
>>>
>>> Ira Erbs
>>> IT CONSULTANT
>>>
>>
>>
>
>
> --
> Ira Erbs
> IT CONSULTANT
> Portland, OR
>
> We can't solve problems by using the same kind of
> thinking we used when we created them.
> -Albert Einstein
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/
> healeydoc at sbcglobal.net
|