healeys
[Top] [All Lists]

[Healeys] BN1 turn signal problem

Subject: [Healeys] BN1 turn signal problem
From: healeyguy at aol.com (healeyguy at aol.com)
Date: Tue, 21 Jun 2011 14:09:45 -0400
References: <916076B0-9FD3-4A46-9380-D53F83658F62@gmail.com>
Randy
Check the two park/turn signal light connections, mainly the ground (black)
wires.  There should be a a ground (again black wire) loop connecter coming
out of the harness that gets screwed to the body at the flasher box on the
left inner wheel well. The rear lights have a screwed ground in the trunk but
the fronts depend on the loop ground at the flasher box.
Aloha
Perry






-----Original Message-----
From: Randy Hicks <Healey100M at gmail.com>
To: Healey List <healeys at autox.team.net>
Sent: Tue, Jun 21, 2011 11:57 am
Subject: [Healeys] BN1 turn signal problem


Hi, got a non-list friend who is being driven nuts with his front turn
ignals. Rear directionals work fine, but fronts both flash regardless of
hich is indicated. Any ideas why?
Early BN1, new harness, new flasher unit and relay (gaps are fine), rebuilt
rafficator, and wiring is hooked up by diagram.
Any ideas would help.
TIA.
Randy
______________________________________________

<Prev in Thread] Current Thread [Next in Thread>