healeys
[Top] [All Lists]

[Healeys] Hot water tube route

Subject: [Healeys] Hot water tube route
From: richchrysler at quickclic.net (Rich Chrysler)
Date: Sat, 25 Jun 2011 14:26:30 -0400
References: <BANLkTim9roWjpR98rFXc2oOOWKiGBvqYJA@mail.gmail.com> <4E059534.9060709@chello.nl> <BANLkTikxjTCqj-AW5nXBC0bHBq=VwDC1Cg@mail.gmail.com>
What is not sometimes immediately (or ever) apparent about routing something
in a fashion other than original is that it can wear against something else,
sit there buzzing and vibrating annoyingly or otherwise become snagged in
another component, etc.  I always figure they assembled these things with
extra clips, ties or other hardware for a good reason, as each item was
costing money.

Rich

-----Original Message-----
From: healeys-bounces at autox.team.net [mailto:healeys-bounces at 
autox.team.net]
On Behalf Of I Erbs
Sent: 2011-06-25 10:43
To: Oudesluys
Cc: Ahealey help
Subject: Re: [Healeys] Hot water tube route

Thanks to all. One thing that amuses me is admonitions to be concerned about
X. The capillary tube has been routed haphazardly for over 35 years without
incident...
I will take care on te-install....

Ira Erbs
IT Consultant
Portland, OR

sent from my Droid, please excuse typos and random self corrections because
my phone has It's own ideas about what word I meant to write

On Jun 25, 2011 12:58 AM, "Oudesluys" <coudesluijs at chello.nl> wrote:
> Make sure it is well fixed along the path under the dashboard, along the
> firewall and on the full length of the engine. Add at least a double
> loop coil between engine and firewall. The soft copper capillary tube
> can easily harden and break/crack because of vibration.
> Kees Oudesluijs
> NL
_______________________________________________
Healeys at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/richchrysler at quickclic.net

<Prev in Thread] Current Thread [Next in Thread>