healeys
[Top] [All Lists]

[Healeys] Electronic Ignition

Subject: [Healeys] Electronic Ignition
From: coudesluijs at chello.nl (Oudesluys)
Date: Mon, 04 Jul 2011 11:31:54 +0200
References: <1812C1C69A994874AB8B11A48876634B@PatrickQuinnPC>
Most fitting instructions give you enough detail to fit the electronic 
ignition. Get the proper type for the distributor.
Lumenition Magtronic, Pertronix Ignitor or similar: remove points and 
condensor, install the electronic module instead, wire up correctly and 
do not forget to pay attention to the proper resistance needed for the 
coil. Set the timing to the correct advance.
If you go for the 123 ignition just replace the whole distributor and 
follow the rest of the procedure. With the 123 Ingnition you have to set 
it up with the proper advance curve. You have several to choose from so 
you can play around a bit for best results.
Get the proper polarity for your car.
Kees Oudesluijs
NL

[demime 1.01d removed an attachment of type text/x-vcard which had a name of 
coudesluijs.vcf]

<Prev in Thread] Current Thread [Next in Thread>