Derek,
Look on the underside of the knob shank. There should be a little hole at 6
o'clock. A spring loaded pin needs to be pushed in to allow the knob to be
pulled straight off.
Rich
-----Original Message-----
From: healeys-bounces at autox.team.net [mailto:healeys-bounces at
autox.team.net]
On Behalf Of Derek Job
Sent: 2011-08-01 12:14
To: Forum
Subject: [Healeys] Replacing knobs on switches
My car has a non-standard light switch knob and a very old wiper knob with
no markings. I am replacing them with new knobs that i have purchased.
Are these knobs just glued in place, and if so do I just 'cut' the old ones
off?
Derek
_______________________________________________
|